उत्पाद जानकारी पर जाएं
1 का 7

Waveshare EM06-E LTE Cat-6 HAT Dual Antennas LTE-A Multi Regions Multi Band Module for Raspberry Pi

Waveshare EM06-E LTE Cat-6 HAT Dual Antennas LTE-A Multi Regions Multi Band Module for Raspberry Pi

नियमित रूप से मूल्य £84.89
नियमित रूप से मूल्य विक्रय कीमत £84.89
बिक्री बिक गया
सभी ऑर्डरों पर नि: शुल्क वितरण

स्टॉक में।

Shipping Methods

To find out all available shipping methods, and the exact delivery time add the product to the cart, and verify it using our shipping calculator.

शिपिंग गारंटी

सभी ऑर्डर पर मुफ़्त शिपिंग। पूरी तरह से बीमाकृत।

हैंडलिंग समय: 1 - 3 कार्य दिवस। (ओन्कीज़ा को आपके ऑर्डर को प्रोसेस करना होगा और आपके सभी आइटम को अपने सख्त गुणवत्ता नियंत्रण परीक्षणों से गुज़ारना होगा।)

पारगमन समय: 3 - 15 कार्य दिवस.

वापसी की गारंटी

किसी भी कारण से यदि आप 7 दिनों के भीतर अपने ऑर्डर से असंतुष्ट हैं तो आप शिपिंग शुल्क को छोड़कर धन वापसी के लिए इसे नई स्थिति में हमें वापस कर सकते हैं।

DOA गारंटी

यदि आपका सामान क्षतिग्रस्त अवस्था में आता है, तो कृपया 7 दिनों के भीतर हमसे संपर्क करें और स्पष्ट और वैध प्रमाण प्रदान करें। ओन्कीज़ा क्षति की स्थिति के आधार पर मुआवज़ा देगा।

गुम/गलत आइटम की गारंटी

यदि आपको कोई पार्सल गुम/गलत/द्वितीयक पैकिंग आइटम के साथ प्राप्त होता है, तो कृपया डिलीवरी के 7 दिनों के भीतर हमसे संपर्क करें और प्रासंगिक प्रमाण प्रदान करें। ओन्कीज़ा क्षति की स्थिति के आधार पर मुआवज़ा देगा।

Features
1. This is an LTE Cat 6 Raspberry Pi communication HAT with GNSS and up to 300Mbps (downlink) / 50Mbps (uplink) data rate. It is applicable for countries/regions including Europe, the Middle East, Africa, Asia-Pacific, Brazil... By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable LTE-A high speed networking, cloud platform communication, SMS, and global GNSS positioning functions.
2. Multi-constellation high-accuracy GNSS positioning: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS
3. Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed LTE-A communication
5. Standard M.2 B KEY slot, compatible with different core modules: EM06-E, EM06-J, EM06-A series
6. Onboard PWR and RST control pin, enabled via DIP switch, for connecting to external IO to turn on/off or reset the module
7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
10. High efficiency power supply circuit, up to 3A output current

Specifications
LTE CAT 6:
1. Region / Provider: EMEA / APAC (except Japan and CMCC) / Brazil
2. Module dimensions: 42.0 x 30.0 x 2.3 (mm)

Temperature range:
1. Operating temperature: -30 degree C ~ +70 degree C
2. Extension temperature: -40 degree C ~ +85 degree C

Frequency band
1. LTE-FDD: B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
2. LTE-TDD: B38, B40, B41
3. 2xCA:
- B1+B1, B5, B8, B20, B28;
- B3+B3, B5, B7, B8, B20, B28;
- B7+B5, B7, B8, B20, B28;
- B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
4. WCDMA: B1, B3, B5, B8
5. GNSS: GPS/GLONASS/BeiDou (Compass)/Galileo/QZSS

Data rate:
1. LTE-FDD: 300 Mbps (DL) / 50 Mbps (UL)
2. LTE-TDD: 226 Mbps (DL) / 28 Mbps (UL)
3. DC-HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL)
4. WCDMA: 384 Kbps (DL) / 384 Kbps (UL)

Package List
1. M.2 TO 4G/5G HAT x 1
2. EM06-E x 1
3. Antenna 2pcs x 1
4. IPEX adapter cable 2pcs x 1
5. 2*20PIN pin header x 1
6. Passive GPS antenna x 1
7. Dual plug USB3.0 cable x 1
8. USB3.0 adapter x 1
9. USB2.0 adapter x 1
10. SMA protective cap 2pcs x 1
11. Screws pack x 1

पूरा विवरण देखें