उत्पाद जानकारी पर जाएं
1 का 7

MOFI Xiaomi Mi 5s Plus 0.3mm 9H Hardness 2.5D Explosion-proof Full Screen Tempered Glass Screen Film(White)

MOFI Xiaomi Mi 5s Plus 0.3mm 9H Hardness 2.5D Explosion-proof Full Screen Tempered Glass Screen Film(White)

नियमित रूप से मूल्य £11.19
नियमित रूप से मूल्य विक्रय कीमत £11.19
बिक्री बिक गया
सभी ऑर्डरों पर नि: शुल्क वितरण

स्टॉक में।

Shipping Methods

To find out all available shipping methods, and the exact delivery time add the product to the cart, and verify it using our shipping calculator.

शिपिंग गारंटी

सभी ऑर्डर पर मुफ़्त शिपिंग। पूरी तरह से बीमाकृत।

हैंडलिंग समय: 1 - 3 कार्य दिवस। (ओन्कीज़ा को आपके ऑर्डर को प्रोसेस करना होगा और आपके सभी आइटम को अपने सख्त गुणवत्ता नियंत्रण परीक्षणों से गुज़ारना होगा।)

पारगमन समय: 3 - 15 कार्य दिवस.

वापसी की गारंटी

किसी भी कारण से यदि आप 7 दिनों के भीतर अपने ऑर्डर से असंतुष्ट हैं तो आप शिपिंग शुल्क को छोड़कर धन वापसी के लिए इसे नई स्थिति में हमें वापस कर सकते हैं।

DOA गारंटी

यदि आपका सामान क्षतिग्रस्त अवस्था में आता है, तो कृपया 7 दिनों के भीतर हमसे संपर्क करें और स्पष्ट और वैध प्रमाण प्रदान करें। ओन्कीज़ा क्षति की स्थिति के आधार पर मुआवज़ा देगा।

गुम/गलत आइटम की गारंटी

यदि आपको कोई पार्सल गुम/गलत/द्वितीयक पैकिंग आइटम के साथ प्राप्त होता है, तो कृपया डिलीवरी के 7 दिनों के भीतर हमसे संपर्क करें और प्रासंगिक प्रमाण प्रदान करें। ओन्कीज़ा क्षति की स्थिति के आधार पर मुआवज़ा देगा।


About the product
1. High Hardness: Glass material after high temperature steel processing, surface hardness up to 9H, impact resistance is strong, not easy scratches
2. Anti-Shatter Film: If broken, the glass breaks into small pieces that are not sharp, making it safer than other glass products
3. 2.5D tempered glass: The 2.5D tempered glass protection screen border round angle for anti-chip
4. Delicate Touch: the glass is coated on the back with a strong silicon adhesive that makes installation easy and attaches the film firmly so as to not affect the touch screen's sensitivity.
5. Automatic bonding: High quality antistatic adsorption film use, make the product joint and split simple, convenient operation

Caution
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

Installation Instructions
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.


पूरा विवरण देखें