Car Aerial DAB Digital Radio Signal Amplifier 12V Automobile 25dB Antenna
Car Aerial DAB Digital Radio Signal Amplifier 12V Automobile 25dB Antenna
स्टॉक में।
Shipping Methods
Shipping Methods
To find out all available shipping methods, and the exact delivery time add the product to the cart, and verify it using our shipping calculator.
शिपिंग गारंटी
शिपिंग गारंटी
सभी ऑर्डर पर मुफ़्त शिपिंग। पूरी तरह से बीमाकृत।
हैंडलिंग समय: 1 - 3 कार्य दिवस। (ओन्कीज़ा को आपके ऑर्डर को प्रोसेस करना होगा और आपके सभी आइटम को अपने सख्त गुणवत्ता नियंत्रण परीक्षणों से गुज़ारना होगा।)
पारगमन समय: 3 - 15 कार्य दिवस.
वापसी की गारंटी
वापसी की गारंटी
किसी भी कारण से यदि आप 7 दिनों के भीतर अपने ऑर्डर से असंतुष्ट हैं तो आप शिपिंग शुल्क को छोड़कर धन वापसी के लिए इसे नई स्थिति में हमें वापस कर सकते हैं।
DOA गारंटी
DOA गारंटी
यदि आपका सामान क्षतिग्रस्त अवस्था में आता है, तो कृपया 7 दिनों के भीतर हमसे संपर्क करें और स्पष्ट और वैध प्रमाण प्रदान करें। ओन्कीज़ा क्षति की स्थिति के आधार पर मुआवज़ा देगा।
गुम/गलत आइटम की गारंटी
गुम/गलत आइटम की गारंटी
यदि आपको कोई पार्सल गुम/गलत/द्वितीयक पैकिंग आइटम के साथ प्राप्त होता है, तो कृपया डिलीवरी के 7 दिनों के भीतर हमसे संपर्क करें और प्रासंगिक प्रमाण प्रदान करें। ओन्कीज़ा क्षति की स्थिति के आधार पर मुआवज़ा देगा।
1. Frequency range: 88-108MHz, 170-240MHz
2. Amplification gain: about 22dB
3. Output impedance: 75 ohms
4. VSWR: 2.5 or less
5. Noise factor: within 6dB
6. Output level: 108dBμV
7. Electrical performance parameters:
- Supply voltage: DC 12-24V
- Operating current: within 70mA
Features:
1. Low noise MMIC device design, more stable, higher sensitivity
2. Using low insertion loss IC design, straight-through state plug-in
3. Support FM FM and DAB + digital radio signal amplification function
4. Signal output interface: FM male connector
Amplifier installation and connection mode:
1. Place the antenna amplifier in a suitable position behind the car stereo, such as behind the DVD or radio
2. Connect the female jack of the amplifier to the male jack of the antenna of the original car radio, and the male connector of the amplifier FM to the receiving hole of the car CD or DVD
3. Connect the power cord to the ACC of the original car to supply power